DIN125 DIN436 Washers

DIN125 Flat Washer/DIN436 Square Washer The flat washer is mainly punched out with an iron plate. The shape is generally a flat washer with a hole in the middle. There are calculation formulas in "Quality Fasteners for Standard Fasteners" published by China Standard Press. The formula is: Thousand piece weight m = 0.00785 × {3.1416 / 4 × washer height × [square of outer diameter-square of inner diameter]  The usage of flat washer 1. Increase the contact area between the screw and the machine. 2. Eliminate the damage of the spring pad to the surface of the machine when removing the screws. When in use, it must be a spring pad and a flat pad, the flat pad is next to the machine surface, and the spring pad is between the flat pad and the nut.   Basic Information Flat washers are usually thin pieces of various shapes to reduce friction, prevent leaks, isolate, prevent loosening or spread pressure. This component is found in many materials and structures to perform a variety of similar functions. Limited by the materials and processes of threaded fasteners, the bearing surfaces of fasteners such as bolts are not large. Therefore, in order to reduce the compressive stress of the pressure bearing surface to protect the surface of the connected component, a washer is used. To prevent the loosening of the connection pair, anti-loose spring washers and multi-tooth lock washers, round nut stop washers, and saddle-shaped, wave-shaped, and tapered elastic washers are used. The flat washer is mainly used to reduce the pressure. When the axial force of some parts is large, it is easy to press the washer into a dish shape. At this time, it can be solved by using materials and increasing the hardness. Any other products Contact me freely, send me inquiry, thanks for your checking!